VBF 40 Multi Channel

1 Hz - 255 kHz   x1000 (+60 dB) Gain  5 built in Filter Responsesvbf40 m sd
Range Topping Versatile Filter / Amplifier System

The Kemo VBF40 combines programmable amplification and high performance analogue filtering in a versatile easy-to-use package. Ideally suited to today's hard-working flexible data capture and analysis applications. The VBF 40 has a unique combination of input gain, 5 built in filter responses, and output gain. This combination makes the VBF 40 a flexible signal filtering and amplification unit with capabilities suited to a wide range of applications. Built in series and paralell conection between channels allows a fully variable bandpass, notch and band stop filters to be configured.
The VBF 40 is available as a full width 19" rack with up to 16 channels, and a compact 4 channel VBF 44 unit. Stainless steel front panels, passive cooling, easy to use front panel controls, BNC input/output front panel connectors, and a very versatile set of filter responses are among the details which make the VBF 40 a top range laboratory filter. 

Flexible Input

The input may be AC or DC coupled. The input may be switched between single ended or differential inputs. Note the AC coupling is matched on both the signal hot and signal cold inputs on the differential input setting.
There is a switchable 4mA IEPE source. Inputs and outputs are BNC connectors, mounted on the front panel.

Frequency Range 1Hz to 255kHz

The VBF40 channels can be independently to frequencies between 1Hz and 255kHz in four 255:1 ranges. 1Hz - 255Hz, 10Hz - 2 550Hz, 100Hz - 25.5kHz, and 1kHz - 255kHz.

Gain Range and Signal Indication

Each channel has up to x 1000 (+60dB) gain. x 100 (+40dB) before the filter, and x 10 (+20dB) after the filter.

There is a signal level indication LED fitted to each channel between the input gain stages and the filter.
Signal level indication - 0%- off -10% - green - 70% - orange - 95% - red.
Each channel has an overall overload indicator on the input.
More >>

Lowpass / Highpass and Series / Parallel

Each channel can be independently set to high or low pass, over the range 1 Hz to 255 kHz.

Pairs of adjacent channels can be operated in series or parallel modes. In series mode this gives fully variable bandpass filtering.
In parallel mode the channels can be set to give bandstop or notch filtering.
this feature of the VBF 40 series allows for a massive range of bandpass, notch and bandstop filters to be set.
More >>

5 Filter Responses

Each channel has 5 filter responses, sharp lowpass, sharp highpass, time optimised lowpass, time optimised highpass, and a bandpass filter response. The filter stage can be bypassed, so the unit can be used as an amplification stage only.

Summary Specification

Channels 2 - 16 per rack
Control Manual LCD and push button
Ethernet FICL II interface
Frequency DC - 255 kHz (4 ranges)
Bandwidth > 1 MHz,  1V signal, 0dB gain, highpass filter and filter bypass
Input Gain  x1, x2 (+6dB), x5 (+14dB), x10 (+20dB), x20 (+26dB), x50 (+34dB), x100(+40dB)
Output Gain   x1, x2 (+6dB), x5 (+14dB), x10 (+20dB)
Filters  5 Switchable; 2 Lowpass, 2 Highpass, Bandpass, and Filter Bypass
Filter Responses  L1, L2, H1, H2, B1
Input Coupling  AC / DC / IEPE (4mA 24V) with 3 stage LED indicator
Input Mode Single ended or differential
Signal level  +/- 10V pk-pk (usually with 'headroom')
Signal Level Indication 4 colour level LED on front panel 
Size 145 x 482 x 420 (3U 19" x 16")
Power 90 -120 / 180-240 Vac 50/60Hz
Expand +


The versatility of the VBF 40 makes the application area very large. They include, classic anti-aliasing, random noise conditioning, all types of mechanical testing, audio work, medical signals, seismic and geological signals, SONAR and oceanographic, military and a wide range of others.

Response Versatility

Each VBF40 channel can be switched to five different filter responses to suit the application. 2 lowpass filter responses, 2 highpass filter responses and one bandpass filter for each channel.
The 5 filter characteristics are:
Flat to Fc  -80 dB at 1.5 Fc
Flat to 0.6 Fc -3 dB at Fc -96 dB at 4 Fc linear phase
Flat from Fc  -80 dB at 0.67 Fc
Flat from 1.67 Fc -3 dB at Fc -96 dB at 0.25 Fc

Flat at Fc -3 dB at 1.06, 0.9 Fc -35 dB at 1.5, 0.67 Fc

The filter may also be switched out completely.

VBF40 Versatile electronic filter responses

More >>

Ease Of Use

The VBF40 has large easy to use push buttons with menu driven control via the LCD display.

Interface and Channel Addressing

The VBF40 has the updated Kemo FICL II text over Ethernet interface. The user is given full control of all the functions, the VBF 40 does not think for itself.

The interface can control up to 64 channels, each rack can be easily configured as a 'slave' unit. In theory an infinite number of slaves can be connected to make a system with many racks. Each filter card can have its control address set by on board DIP switches, each card is a 'listen only' device in the control system. This means cards can share the same control address, and the cards sharing the same address will all be set to exactly the same settings. This gives interesting possibilities, especially if all channels in a system will always be set to the same settings. Only one set of commands either from the front panel or from the interface need be used. One VBF40 frame can control a total of 64 channels if needed.

More >>

Block Diagram

Block diagram of Kemo VBF 40 filter card

This shows the generic block diagram for a Kemo 40 series filter channel.

Expand +

Related Systems

The VBF 40 is part of a range of filters.
The VBF 44 is a 4 channel system, with channel grouping and tracking functions which make it ideal for twin sensor applications.

Price/Performance Ratio

Due to its versatility the VBF 40 range offers significant price performance advantages over similar filter systems. Tremendous care has been taken to ensure repeatable and dependable performance.

For more information please contact us.