- Easy to use
- Fast delivery
- Filters from <0.1 Hz to >500 kHz
- Accepts 1200 or 1600 series filter modules
- Factory set cut off frequency (1200 modules)
- 255 filter steps (1600 modules)
- Gain to +60dB (x1000)
- Single ended / Differential / IEPE inputs
- Isolation
(galvanic) between power supply and signal
- Screw terminal connections
- Configurable inputs and gain
- 10 - 30 V DC power input
- Power on indication
- Compact size
- DIN Rail versions
- Pocket versions
CardMaster 1 pdf data sheet (120 kB)
|
 |
The Kemo CardMaster 1 has been updated, it is now smaller, easier to use and
has a number of technical improvements, including surface mount manufacture.
CardMaster 1 combines; small size, easy to use features, a wide range of filter
response and frequencies, and a wide range
DC power input, all in small compact package It is a great little problem solver for those small noisy
signals, in the lab, in the factory, on plant, in the test rig, it also makes it
quick easy and economical to try out a filtering in a signal path.
CardMaster 1's can be used with Kemo's 1200 series
and 1600 series filter modules. These are available with the standard
Kemo filter responses, suitable for anti-aliasing, general purpose and
traditional Butterworth filtering applications.
CardMaster1 has input gain, selectable by the user up to +60 dB (x1000), AC or
DC input coupling, single ended or differential input, simple connections and a
wide range of DC power input. The power and signal paths are isolated
(galvanic). Making the CardMaster 1 a flexible, compact signal filter
amplifier.
CardMaster 1 can be fitted to DIN rail systems for industrial applications.
CardMaster 1's are available in the Kemo PocketMaster series of rugged
enclosures. PocketMaster 1200 for fixed frequency applications and PocketMaster
1600 with external controls of gain and cut-off frequency.
Summary Specification
| Channels |
1 |
| Control |
On board jumpers and user fitted
resistors |
| Frequency |
Depends on filter modules fitted |
| Gain |
0, +20dB, +40dB, +60 dB and user set |
| Filters |
Depends on
filter modules fitted |
| Filter Responses |
Depends on
filter modules fitted |
| Input Coupling |
AC / DC |
| IEPE |
Yes 4mA 20V |
| Size |
95 x 60 x 20 mm (3.7 x 2.4 x 0.8") |
| Power |
10 - 30 V DC, 2.5 Watt |
|
Applications
- Local signal filtering and amplification
- Condition monitoring systems
- Portable applications
- Accelerometer filtering and amplification
- DIN Rail Industrial systems
- OEM uses to filter noise
CardMaster 1 fitted to typical industrial case for OEM type application.
|
|
Specification
Filter type - Kemo 1200 or 1600
series filter modules
Gain - set by dip switch 0,+20,+40,+60 dB and user set
Connectors - 5.1 mm (0.2") screw connectors
Signal Levels - +/- 10V
Input Coupling - DC / AC (dual line AC for differential input)
Input Modes - Single ended / Differential / IEPE
IEPE - 1 - 10 mA 24 V adjustable
Input Impedance - 1MΩ
Output Impedance - 50 Ω (direct
from filter module)
Bandwidth - 0 dB Gain, > 600 kHz
Trim adjustments - gain and DC offset, multi-turn pots.
Indicators - On board red power on LED, connections for
additional external LED.
Power - 10 - 30 Volt DC, 2.5 Watt typical.
Dimensions - 95 x 60 x 20 mm (3.7 x 2.4 x 0.8")
Fixing - 4 holes 3.5mm, 51 x 91 mm pitch
0.14", 2" x 3.6" pitch
Weight - 0.06 kg (2.2 oz) (excluding filter module)
CardMaster
1pdf Users Instructions (106 kB)
Ordering Information
CardMaster 1
Specify filter response or type
Specify cut off frequency 1200 modules
Specify frequency range 1600 modules
OR contact us and we will advise the most suitable
choice
OR try the Filter Finder to help you find the
filter you need.
DC Power - The
9-30V DC power input in this unit uses conversion methods, please check our page
about DC Power.
CardMaster 1 pdf data sheet (120 kB)
|